Water Pumps Work Questions:

Question #1:

How can i drain out standing water cheaply?

i hit about 50 gallons of standing liquid in my garage. my garage has a mechanic incurvature in the center that you can go low and do lubricator changes and impact low ur car.

however fresh it got flooded and i requirement an efficient way of draining it.

i tried using a tubing pump but since the liquid is low and not above me it didnt work.

does anyone hit a cheap easy way of taking it out? without having to pay hours with buckets?

Question #2:

How would you solve this calculus work problem?

A water incurvation has a semi-circular cross section w/ a length of 0.25m and a length of 3m. How such impact is required to viscus the liquid discover over the rim of the incurvation when the trough is full
water=9.8kn/m 3

I mostly just poverty to undergo the process, not just the answer. Plleease : thank youu

Question #3:

Calculus "work" problem?

hi,

I worked this difficulty but today I can't combine it, so Im intellection I did something wrong

"A liquid trough has a semicircular interbreed section w/ a radius of 0.25m and a size of 3m.
How such work is required to pump the liquid discover over the rim of the trough when the incurvation is full?"
weight of water= 9.81 KN/M 3

I shouldn't have to ingest combining by parts or anything, so my combining should be pretty simple, with maybe a u substit. if anything.

I took the volume of my "slice" then multiplied it by weight of water, then by my move of -2.5-y do you think this is wrong??

thank you!

Question #4:

What is wrong with my Dodge neon?

The car is a 1996 dodge argonon sohc 2.0 motor with an automatic transmission. The car was working fine until some weeks past it obstructed working. The car will invoke over and start but stalls when I press the brake to shift discover of park. It is effort blast to the plugs. There is fuel effort to the render rail. The locomote is not making any fantastic noise. There is no liquid in the oil. I denaturized the render pump, crack sensor, and cam device all out of fling yard. I tested the wind and wires on my brother’s automobile and they worked. Any ideas will help?

Question #5:

A tank is full of water. Find the work W required to pump the water out of the spout?

Use 9.8 for g and 3.14 for π. If you enter your respond in scientific notation, ammo the decimal continuance to digit decimal places. Use equal rounding if you do not enter your answer in technological notation.
r = 3
h = 1.5

Question #6:

2001 Cadillac Deville overheating?

Around town my automobile does not overhead but as presently as I jump on the freeway for about 5 miles at 65 mpr it overheats.
I can drive to work finished municipality 20 miles, no problem but I cannot verify the superhighway to impact .

Idles fine, coolant warning comes on, analyse engine comes on

I've denaturized out: liquid pump, upper/lower radiator hoses, radiator/resorvoir cap and I have flushed the system.
Could it be the radiator?

Question #7:

Sound of water sloshing in engine area?

I had my timing belt, liquid pump, and alternator track denaturized on Monday. Ever since, I've been chance the noise of water sloshing around in the engine area. It's not abominably loud, but noticable, and typically when I'm stopping or accelerating from a kibosh light. Tonight I also heard it when I made a sharp turn. I hit never heard this good before, until I get the impact done Monday. I'm thinking on attractive it back to the shop to get checked tomorrow, but some ideas? What's feat on?

Someone advisable baritone coolant, which I checked... it's about half artefact between "full' and "low" so shouldnt be feat this sound.
Edit.... I've also noticed, since this work was done, that the "hum" of my automobile is slightly higher in pitch. Not a lot, and it's definitely not a squeal noise or anything... just a assorted hum. Is this connatural with the newborn belts etc?

Question #8:

Its a 1979 Orion tri-hull. 305 chevy motor. Takes on water.?

Im checking this dish out. The guy says it was taking on water so he had the boot replaced. He took it out and it still took on water. Not a lot, the billage viscus works good. But he says theres a revealing somewhere. Anyone undergo what else strength not be sealing right? Its a pleasant boat. Been substantially condemned tending of, Dude wants 800 bucks. newborn apholstry, story redone. Just leaks. It doesnt countenance like there are any cracks in the hull. what added could it be?

Question #9:

Work Problem, calculus?

A swimming bet has the shape of a correct circular cylinder with radius 30 feet and peak 10 feet. Suppose that the bet is full of water consideration 62.5 pounds per boxlike foot.

The impact W required to pump every the liquid to the top of the bet is given by what?

The work W required to viscus all the water to a papers 2 feet above the crowning of the pool is presented by what?

Question #10:

What is the work required [10 Points!]?

A tank has the shape of an inverted broadside strobile saucer at the bottom with peak 4 feet and radius 4 feet. The cell is flooded of water. We viscus discover water to a pipe at the crowning of the cell until the water level is 2 feet from the bottom. What is the work required?



** Powered by Yahoo Answers