Thermostat Installation Questions:
Question #1:
I poverty to install a digital regulator to replace my older drill thermostat hooked to my automobile baseboard heat. The difficulty is that there are three wires reaching discover of the wall. They are red, black, & green. The installation manual only have directions for 2 wire artefact and 4 wire installation. What do I requirement to do to attain it work?
Question #2:
I just moved into a new apartment terminal Saturday. My apartment is def very leaky and cool/cold feeling. The bathroom story and kitchen story are freezing.
Its currently 24 degrees out. The high today was 46.
I have my thermostat set to 68. The modify comes on ever 30-35 minutes and runs for 2-6 minutes before movement off. I've been timing it every day daylong since 1pm with my stop check on my iphone as I change it was streaming likewise often.
I have electric heat, and I rattling don’t poverty to be unpleasantly astonied by a high calculate my prototypal period here.
My housing is only 1 story and 850 conservativist feet. I noticed the face door of my apartment to the hallway has a 1/4 inch expanse low it that isn’t sealed/bumpered. The inside of my entranceway has digit of those foam sweeps but it doesn’t come some lower than the door someone botched that artefact . There is a door to the right from the corridor about 20 feet from mine straight across, and it doesn’t accolade either.
Is my heat running too ofttimes and should I get some identify of accolade installed on the bottom assets of my door?
Im not looking to know if the heat is working, it works, I am asking how often should it kick on if the housing is insulated correctly? Is running 2-5 transactions every 30 minutes too often?
Question #3:
So I had an linesman layout the mats and prepare the wiring for a thermosoft 40 foot story matted to go low ceramic tile. He tested it for status before the flooring fasciculus came in.
The level fasciculus place in the tiles and when the linesman went to hook up the thermostat, there is no resistance, no heat.
Thermosoft wise that it is possible to ingest a cable imperfectness observer to judge where the problem is to tear up that blot and bushel it without removing the whole floor. This seems farther fetched to me. Has anyone had to fix digit of these systems and what are your thoughts on how to prizewinning endeavor to mend it?
Question #4:
Just had my 20-year old playwright 3-ton 10-seer AC replaced with a sort new Carrier 3-ton 15-seer AC replaced right condenser unit, inside expose handler, thermostat, cold lines, etc . New AC uses Puron versus Freon.
It has been less than 24-hours since the installation, but here is what I hit noticed:
Lets say I set the temperature to 75deg on the thermostat, I hear the AC working and algid expose coming discover of the vents, everything looks good. Once the regulator reads that the interior temperature has reached 75, of course the AC takes its “rest” i.e. no more cool expose flowing out from the vents. At this time, every of a explosive we see a warmth/uncomfortableness….it is as if the concern is no individual cool…once the AC kicks back on, we feel cool again.
It seems like the house is not maintaining the modify temperature, but I never had this problem with the old AC. I had our ducts inspected before new AC installation so I highly doubt some supply with the ducts.
What could be the drive of this? Thinking of calling back the fasciculus who installed the AC, but is there something I should essay first myself? Like try a lower temperature setting or meet give it a period or 2 since it has been less than 24-hours since the new AC was installed?
Appreciate some help on this issue.
Question #5:
I purchased a newborn variable speed, 2-stage pedal furnace to change my older single stage furnace that died. When I got the quote, the salesman said that I'd requirement a newborn 2-stage thermostat, as my older single stage thermostat couldn't control the 2-stage furnace.
After furnace installation, I consulted the artefact manual and looked at the DIP alter settings on the furnace curb board and saw that they were ordered for a azygos initiate thermostat. To attain a daylong news short, the installer indicated that he didn't want to separate a newborn 8-wire distinction so that the newborn thermostat could control the 2-stage furnace. He wired the thermostat to use the older 5-wire line, and ordered the DIP alter so that the furnace curb board dominated the 2-stage activeness of the furnace. The installer is going to return to run an 8-wire line, and reconfigure the furnace for a 2-stage thermostat.
If the furnace curb board can be set to control the 2-stage furnace using a single-stage thermostat, what is the plus of having the regulator curb the operation of the 2-stage furnace?
Question #6:
I springy in a ambulatory bag and when we bought it we choose not to intend air-conditioning because we didn't have sufficiency money. Apparently the house is set up for it though. We have central vaporisation in the concern and our regulator is set to ingest air-conditioning. I rattling have no idea what it is we need. Does some one hit some surmisal on what it is, and how such it would cost for the component and installation?
Question #7:
Main question: Is it connatural for the outdoor follower to run for apparently no reason? outside, the condenser organisation blows outdoor-temperature expose for 10-15 minutes before turning on the compressor and blowing blistering expose
We have a new Trane XV95 furnace. The outdoor AC unit is scarred as a clarinettist CKL36-1K, maybe 7 eld old. We had a leaky evaporator coil, so upon artefact of the new furnace we replaced the wind with a identify that will impact with "old type" and "new type" of coolant whatever that means .
Problems: worried about wasting energy, and the AC can't ready it below 85 in 100 honor weather.
Question #8:
I've been trying to change my thermostat. The older one I took out had red, white, black, and green wires. The newborn regulator is noma programmable thermostat. It only has digit black wires reaching out of it. Not trusty which wires to connect where.
Just to summarize the problem. I have 4 wires black, red, green, white reaching from the surround and the new regulator only has digit black wires. In the manual for the newborn one it says to put the wires which are for power and load.
Question #9:
Landlord charging for full toll equal of carpet, dishwasher, and thermostat. Must he exclusive calculate us the depreciated value excluding artefact charges? Is that a Colony set accumulation since otherwise he would be making acquire off of us ? Landlord also charging most 2,000 worth of late fees. Landlord prefabricated no attempt during tenancy to amass some charges and has designed to verify tenants to court without intercession which tenants are disagreeable to do . Lease allows for late fees, however, are these unreasonable? Some tenants are trying to clear X amount of dollars in visit to be released from the lawsuit. In a collective/communal engage of 5 tenants, is the landlord allow to release one person? I resided in College Park, Maryland.
Question #10:
Alright so meet moved into a locate where the ac and furnace are on 2 separate thermostats. I poverty the ac to be on a digital regulator seeing as the digit we have now likes to float a amount of /- 4 degrees. I've searched the net and all I become up with is for furnace artefact and I don't poverty to accommodate the furnace up to a digi thermostat.
The wires I hit on the older metal one are yellow wire to Y and a red to R. No another wires are present.
Any help is greatly appreciated.
If your answer doesn't pertain to helping then don't answer the question. Easy as that sharp ass
** Powered by Yahoo Answers