Rubber Hoses Questions:

Question #1:

Coolant Leak - How do I get to it?

2005 WRX - Just replaced the radiator, which had a nice bounteous crack on top, only to ease hit the same sickly sweet smell. Pressure tested it and found it to be a pinhole revealing on the left lateral of the engine in a rubber hose. This tubing is incoming to the exhaust manifold. I hit no clue what it goes to, my assist manual doesn't seem to have it, or i can't seem to find it. The tubing is a relatively short rubber tubing that clamps on to larger metal tubes at the crowning and bottom. I don't know how long it is feat to terminal and I do not want it to change on me mid-drive. It is in a tight spot which seems to be closed by the inclose on the bottom. You would need the hands of a small Asian boy to intend to it.

Any intent as to what it is and/or the easiest way to get that bugger off?

Question #2:

93 taurus 3.2 replacing heater hose, what needs to be removed to get to it?

Hello im disagreeable to replacce the bullet hose on my 93 taurus sho 3.2. it has a 3 progress foam tubing connecting to a metal pipe. i unhooked the hose but i slope remove the pipe there is likewise such clutter.. do i need to remove the increase to get to the tubing ? it manus up to the liquid pump. thanks

Question #3:

what rubber washer can i buy for my countertop dishwasher?

My maintenance man says I need a rubber washer to go exclusive the tubing that connects to the faucet for my dishwasher. He doesn't have digit that fits but I requirement to intend one so liquid stops spraying every over from the connector/faucet area. Can anyone tell me what to acquire and where to get it? thanks

Question #4:

Village water tank with stopper using fluid dynamics physics problem.?

I have no idea how to cipher this and the aggregation is not serving me much:

A village maintains a super tank with an unstoppered top, containing water for emergencies. The water can drain from the cell through a tubing of diameter 6.10 cm. The hose ends with a nozzle of diameter 2.15 cm. A rubber stopper is inserted into the nozzle. The water level in the tank is kept 7.50 m above the nozzle.

a Calculate the exertion obligate exerted by the nose on the stopper.
_________ N

b The stopper is removed. What accumulation of liquid flows from the nozzle in 2.00 h?
_________kg

c Calculate the judge push of the flowing liquid in the hose just behindhand the nozzle.
_________Pa

Question #5:

Burning rubber/burning bacon smell coming from under the hood?

My 95 Nissan Pathfinder, which has been in and out of the shop, was employed fine until a some days ago. The temp judge reads a connatural operative temp, but there's a noticeable smell of executing rubber/bacon and a lowercase bit of smoke when I stop. Over the past few months, I've had the following replaced: engine, radiator, water pump, every belts, a some hoses, shelling cables, thermostat. It still seems to be employed fine, but I'd like to undergo what's going on, if anyone has any opinion. Thanks in advance!

Question #6:

What is the diameter of a washing machine hose?

I springy in an apartment, so this is the only conclusion I can think of. I revilement a washer tubing that is corroded on to the faucet. Now kinda than stink the housing with more PB, i conceive I just want to get a mender for the hose. Question is, what diameter is a standard rubber hose?

Question #7:

Wanting To Build OverFlow and Sump for my Aquarium?

I've been watching videos on Youtube on how to build a overflow and sump . the antiquity impact it self seems pretty cushy and straight forword, I'm just not trusty about what size arrhythmia tube i should use for my huge Aquarium.

I heard the dimensions of the cell can make a bourgeois in the size of the PVC Overflow so not sure what to use since my cell is rattling big. The measurements of my cell is 70"Long x 31"High x 17Wide" 150 gallons .

I hit the original pump that came with the aquarium it has a naif rubber tubing that's maybe a inch wide and 17"inchs long if This Helps .It looks to me like it was prefabricated for a Sump so I'm pretty sure it's the right amount of Gph for my tank, it seems pretty brawny i proven it out.

so if anyone got any ideas or some input please yield a interpret and permit me undergo would love to try this out seem same a recreation plaything ,
i prefabricated a quick video effort of the aquarium and posted it on to exhibit filler of it.


what it looks same inside is exclusive temporally it ingest to be for my King diapsid i made him a lake type deal and every this laxation looked really pleasant at the time .since hes absent now i filled up the other lateral wit bit of liquid and put a Fluval underwater filter 2 fish. Wanting to go full scale but requirement to make Overflow and Sump first.

Since i know someone gonna communicate lol. The example of vegetation is exclusive there for support don't wanna verify a quantity of the acrylic gift out dirt i'm ready to do everything

Question #8:

Does anybody know if it is ok to use the As Seen TV product Flex Seal on a cracked filler gas hose on a car?

I hit a fissure on the filler country of the foam tubing for my gas. Does anyone undergo if Flex Seal is alright to use? I undergo it would modify it but module it hold?
BTW It is not the pressurized line, meet the line going from the tank to the locate where you put the nose in to fill it up. It is rubber.

Question #9:

Bernoulli's Equation?

A village maintains a large tank with an unstoppered top, containing water for emergencies. The water crapper drain from the tank through a tubing of diameter 6.95 cm. The hose ends with a nozzle of diam 2.35 cm. A foam routine is inserted into the nozzle. The liquid level in the cell is kept 7.50 m above the nozzle.
a Calculate the exertion force exerted by the nozzle on the stopper.
N

b The stopper is removed. What mass of liquid flows from the nose in 2.00 h?
kg

c Calculate the judge pressure of the flowing water in the tubing just behind the nozzle.
Pa

Question #10:

How to install a washing machine to under-sink?

For some think no consort wants to do a low sink artefact for a washing machine , Wondering why is that ?

And i will today essay to establish the Washing organisation myself. The rubber hose from the old work organisation are ease their. Do i just change the old foam hoses with ones and turn on the water from the water regulator ?



** Powered by Yahoo Answers