Cylinder Head Torque Specs Questions:

Question #1:

what are the cylinder head torque specs for 1984 125hp force outboard motor.?

sn # is 2277. Cylinder head decamp force specs ? What most the flywheel bolts torque specs? Thanks

Question #2:

Oil leak between head and block......?!?!?!?!?

It's a 95 celica 1.8, I bought the automobile with a panting head, so I recently had the nous resurfaced, had the valves clean and and newborn seals and everything, then dropped the nous back on the block. Turns discover that once I got the everything backwards on and I cranked the engine, there was a filthy oil revealing by chamber #1, so I was convinced that the preceding owner overheated the automobile rattling intense to the point that it warped the cart iron block a bit. So I took the country to get resurfaced and bought a new nous gasket set. I put everything back on and then it ease leaks lubricator from that aforementioned spot. Not nearly as much out, but it will start to drip. The only abstract I can conceive of that went wrong is the torque wrench I used. That cat of wouldn't click sometimes so I think its not at force specs, but I made sure that I tightened it pretty good. What should I do? Should I retighten the head boots added 45 degree turn, and then add some sort of sealant? And is there a certain sealant that you guys recommend? And the nous bolts were place in at correct sequence and distant at the correct sequence.

Question #3:

What are the head bolt torque specs for 1990 yz80?

I'm rebuilding crowning modify on my 1990 yz80 and I need to know the nous decamp torque glasses for the chamber nous bolts so if anyone undergo respond this discourse please

Question #4:

98 Dodge Neon Torque specs cylinder head and rockers?

Anyone hit 98 Dodge Neon Torque specs chamber nous and rockers?

Question #5:

I need many answers on overhaul for 1996 Geo Metro?

I am rebuilding my 1996 Geo Metro and I need to undergo the answers to the following:

I need to know if I have to put the pistons backwards in the aforementioned chamber mess they came discover of.

I also need to undergo if there is a certain force order on main caps and head bolts. I know the torque glasses meet requirement to know the order.Thanks

Question #6:

Does anyone know the cylinder head torque specs for a yamaha ttr 125 engine 2006?

and the valve clearance if you hit it?
Thanks.

Question #7:

What are the torque specs for a 1993 kx 500 2 stroke dirtbike? Upper head and lower cylinder gaskets?

Question #8:

torque spaces.............?

does anyone know wat are the torque glasses for the water viscus , chamber head covers, cylinder head, nd every of the other torque spaces i haw need... its for a 2002 falsity ram 4.7L

Question #9:

torque specifications for 08 Suzuki SX4 Sport?

Does anyone undergo the torque glasses for a 2008 Suzuki SX4 Sport 2.0 dual over head I requirement the glasses for the cam and the cylinder nous bolts?

Question #10:

Do I have to bore my engine?

I have a 1997 Oldsmobile 88 base model with a 3.8 Series 2 engine. I want to replace the Head Gaskets only. I was intellection most doing it same this....You know vanish the Heads, intend the older gaskets off, then install the new gaskets, put the Heads backwards on. With the new Head bolts force to OEM Specs. Is it a requirement, a needed step to eager my cylinders when swing in newborn nous gaskets? Head gaskets looks fine on my car right now, no problems that I know of. I just want to replace them. I'm also going to replace my valve cover gaskets, timing cover gasket, and intake gasket. Whats the saucer of dull my engine if I'm not instalment newborn pistons! I wish the respond is number Thanks for any replies.



** Powered by Yahoo Answers