Crossed Drilled Rotors Questions:
Question #1:
Where can I get a new ABS exciter disk for my cross drilled and slotted rotor?
Its for my F-150 2wd truck..It is a 2005, and yes i still have the anulus and i removed it, it seems that they meet slip off.
Its aftermarket rotors and the anulus comes soured the hub gathering which is apart of that rotor.
I am not sure who prefabricated the rotor, I bought the pushcart from a co-worker.
Question #2:
Why do my new brakes screech really loud?
So i meet had a brand newborn set of cross drilled and slotted rotor along with sort new EBC green-stuff 7000 4x4 ceramic brushwood pads on my 95 ford bronco 4x4. I had professionally installed by life boys. today whenever i brushwood hard i hear an extremely blasting screaching sound good like im burning rubber but its reaching from the brakes. I took it back and they said everything was installed correctly. so is it the identify of brake pads that are wrinkled of a touchable or are they nonfunctional or What? I know braked pads tend to admit when they are new but i dont conceive that is the housing hear because it is too loud. Thank you!!!Question #3:
Ford Mustang After Market brake calipers?
I have baer cross drilled slotted rotors on my 2003 ford mustang GT. I bought it this way. I just replaced the rotor because i got into an happening and messed up the older one. I also seem to have messed up the caliper. I requirement a caliper that fits that rotor. All i'm finding is rank brushwood transmutation kits. Where crapper i encounter aftermarket calipers by THEMSELVES? :-/ THANK YOU SO MUCH IN ADVANCE!!!!Question #4:
Is a 1998 Mustang GT with mods worth getting for $3400?
Mustang Gt Manual 5 speed.35,000 miles on New brief block and restored heads.4.10 gears with Eaton Possi Moser 31 strip axles,78mm throttle embody and plenum,
Msd Coils and wires,B&M Ripper,P.I. intake from a 99-04 ,Bassani X pipe, Flowmaster catback,
BBK Cold air induction, BBK underdrive pulleys, Eibach cloudy springs,
18" Authentic Saleens, 275s On back.Good tires. Cross drilled and slotted rotors.
200k Mi but everything has been redone. If your looking for a solidified car this is it,
All Leather interior, New black furnishings Kit
Question #5:
Is a 1998 Mustang GT with mods worth getting?
Mustang Gt Manual 5 speed.35,000 miles on New brief country and restored heads.4.10 gears with Eaton Possi Moser 31 spline axles,78mm enrich embody and plenum,
Msd Coils and wires,B&M Ripper,P.I. intake from a 99-04 ,Bassani X pipe, Flowmaster catback,
BBK Cold air induction, BBK underdrive pulleys, Eibach cloudy springs,
18" Authentic Saleens, 275s On back.Good tires. Cross drilled and slotted rotors.
200k Mi but everything has been redone. If your hunting for a solid car this is it,
All Leather interior, New black carpet Kit
Question #6:
What are the use for Cross drilled and slotted rotors and what do they do and help?
Question #7:
How much horsepower will a 1998 mustang gt with these mods have?
Mustang Gt Manual 5 speed.35,000 miles on New short block and restored heads.4.10 wheelwork with Eaton Possi Moser 31 spline axles,78mm enrich body and plenum,
Msd Coils and wires,B&M Ripper,P.I. intake from a 99-04 ,Bassani X pipe, Flowmaster catback,
BBK Cold expose induction, BBK underdrive pulleys, Eibach cloudy springs,
18" Authentic Saleens, 275s On back.Good tires. Cross drilled and slotted rotors
Question #8:
I want to buy a 1998 Mustang Gt. Does this sound like a legit deal? Asking 3800 for car?
Mustang Gt Manual 5 speed.35,000 miles on New short country and rebuilt heads.4.10 gears with Eaton Possi Moser 31 strip axles,78mm throttle body and plenum,
Msd Coils and wires,B&M Ripper,P.I. intake from a 99-04 ,Bassani X pipe, Flowmaster catback,
BBK Cold air induction, BBK underdrive pulleys, Eibach lowering springs,
18" Authentic Saleens, 275s On back.Good tires. Cross drilled and slotted rotors.
200k Mi but everything has been redone. If your looking for a solid car this is it,
All Leather interior, New black furnishings Kit fresh installed.
Question #9:
IS there a difference in performance of Cross-Drilled, Slotted Rotors and OEM Rotors?
I hit a 1998 Lexus LS 400. Its instance to replace the rotors. I'm going to place 20" wheels on it. Wondering should I upgrade to action rotors or OEM rotors. I've been told they have one the large brushwood systems ever. The rotors are huge and they say, it wouldn't modify the performance such if I get performance rotors. Any advice would help.....Yes and MONEY is issue.
Question #10:
How much is this 1993 Honda prelude si worth?
I was hunting at this 1993 Honda Prelude Si. it has 240k miles and had a rebuilt locomote place in it 80k miles ago. It has a algid expose intake, new headers, new exhaust. Strut interbreed bar, newer headunit, brief shifter. 4 rotate drilled and slotted rotors. It is a 5 speed. It has whatever scratches, chipped paint on bumper, needs newborn luggage seal, might need new clutch soon. Also needs new ac compressor. It comes with digit though. I need to know what this automobile is worth before buying.Be Serious people
** Powered by Yahoo Answers