Brake Hose Questions:

Question #1:

why does my altima die when i brake?

I hit a 1995 Altima that died on the route and spewed all my radiator and trans changeful as substantially as every my oil when it happened. I had it towed and my cordial community street journeyman said my trans tubing blew off. He place it back on, tightened it, and refilled the fluid. Then we refilled the radiator and place 4 quarts of oil in. I started the car and after a some tries it started and stayed running but the car was nearly revving patch it was idling and there was a knocking sound. I put it in equipment and it drove until I braked and that's when it died. This happens every instance I brake. The man said he would analyse it discover so he drove it and pushed on the pedal when he obstructed and the automobile stayed running. I told him I didn't think that was beatific for my automobile and hit had it parked for the weekend but no one seems to undergo what the problem is. He did feature possibly it was a sensor. Does anyone undergo so I crapper educate financially for what I requirement to do mend it verses junking it if the work is likewise extensive . BTW my speedometer and rpms don't impact every the time, the expose has worked only on level 4 intense drier switch thing but today entireness on 4 only patch far start is engaged and pronto stops when I depress the brake to agitate into gear, and the machine at autozone said I have a intense o2 sensor has passed emissions for 4years w this though a intense belt device and a intense pace sensor....I undergo that's alot but that's been feat on forever and the automobile ending is my main anxiety since that is a newborn issue. Any advice is appreciated.
Oh and my car is automatic not manual....

Question #2:

Brake Cable Guides for Diamondback Sortie bikes?

I need newborn telegram guides for my bike. There are three of them on the downbound tube of the bike. They screw into the plaything on the bottom. They stop all digit hoses and a cable. Is there anywhere that I can intend these. Someone gratify help.

Question #3:

1988 Honda Cr125 Dirt Bike Questions?

I'm intellection about buying this cycle for 150 . But he said it doesn't start and needs a ignition coil and a new carberator. He says The flash comes and goes wont run but fires up when spark is there locomote is good. It needs backwards brakes, and a handle hose. Could I place these things in myself as a noob a dirt bikes, never owned one before. How such would it cost to have sime one to do it? How pugilism if I did it myself ? Thanks

This is what he describes the cycle as

bike on trade its every here but face brake appendage and tubing and side plastic but in good appearance for its age no cracks on frame radiators in good shape and engine is rank and decent has spark and good densification needs choke plunger on the carb............ there is 300 dollars worth of parts here lonely so mend it up to mate or use for parts bike. THANKS GUYS

Question #4:

Want to know how much to sell my non running dodge charger for?

dropped a 440 in it, still hit original 383. Engine runs but automobile does not, needs a radiator. embody in good condition, slight rust. Interior has been re done with the original red. so all is in order on the inside. Electrical, hoses, brake need to be done. Have lots of knick knacks for the automobile knobs, gauges, handles, wiring, etc. And one player traveller entranceway in excellent cond. I dont want to permit it go at a toll likewise low nor do i not want it to not delude either. I just requirement an idea. Thanks so much.
its a 1966 falsity charger sorry forgot to allow the most essential part!

Question #5:

2000 plymouth neon brake booster check valve?

My mom's school pulled it out and she left me to encounter the part. It has 4 holes in it where, I conceive 4 hoses go to. There's 2 constituted hoses, digit I surmisal I'll call it the bottom is the fattest, the other is on the lateral of it. Then there's a lowercase one on the other side. And on the top there's a naif one. I can't find this conception anywhere. Everywhere I go to the thing only has 2 holes in it. where can i encounter it? and whats it called?

Question #6:

spongy brakes in my ford focus! please help?

So I was attractive the expressway today to see one of my friends and none of the sudden when I pulled discover at the exit I was supposed to take my brakes change really spongy and I had to near the brake all the way to attain a telling stop! I had to advise the brushwood clutch every the artefact down, more than the norm! When I got to my destination I check what the inferno was wrong with my brakes...checked the lines, the brushwood changeful reservoir and hoses. What I found discover was that my brushwood same was on and that every the brushwood changeful was gone....what I am questionable to do to fix this problem? crapper anybody guide me how to check and mend this absorptive brushwood problem. It is really a scary experience when you are driving with your brake acting up funny! something nobody wants to endeavor with....please help

Question #7:

How do i plug the brake line on a 2001 mustang?

I am having trouble with my car's brake not releasing. I hit changed discover the Calipers, Pads, and rotors and having the aforementioned problem, so I poverty to try the tubing next. I hit the attractive the hose soured down I meet need to know what to plug the line with. Any help would be greatly appreciated. Thanks!
I changed the rotors cod to the person owning the automobile before myself did not modify the pads and undone the rotors leaving me with a ton of break dust. Also I am not dynamical the lines I am plugging them to stop air from effort into the abs and dynamical the hoses, I just requirement to know what to plug them with. Any respond from another contributors would be great.

Question #8:

Thinking of buying a 91 300zx TT In "good" condition?

For sale that I institute is a FTO 1991 300ZX twin turbo with 68,000KM w/ drill transmission.
Full Authentic Veilside Body outfit worth over 8,000 for the whole kit rims, exhaust, lateral skirts, rear bumper, cowl and front bumper
Only filled up with premium shell gas
Car has never been insulted or bagged
Car have has 300hp, very alacritous car!
Has never seen deceive or unvoluntary in the rain. Always garage stored in the winter.
No leaks, creaks, rust or knocking. Very clean
Have every original commercialism papers
Car has t-tops that do not leak very thin in a 300 as the foam gets old and breakable
Car has PW, PL, PS, AC not hooked up and HICAS
Car runs on 15/40 Royal Purple Synthetic lubricator with K&N lubricator filter and is denaturized every 1,500km
Car has Royal purple in the differential, noesis control and manual transmission denaturized discover 1,000km ago
Coolant flush done in last 1,000km
Timing track was finished at 50,000km, this included:
-Timing Belt
-Timing Belt Tensioner
-Camshaft lubricator seals
-Crankshaft oil seal
-VTC Springs
-VTC Cover Plate O-rings
-Thermostat
-Water Pump very ordinary unfortunate on 300s
Serpentine belts were every finished at 50,000km
-Power steering belt
-A/C Belt
Alternator Belt
Engine was overhauled last season to establish the intakes and to clean up the engine bay.
Overhaul included:
-New intake plenum gasket
-New half moon seals for each regulator cover rattling ordinary supply on 300s
-New hoses on everything Coolant hoses, Fuel lines, Air lines, PCV Lines ect
-New PCV'S
-New belt sensor and belt sensor wiring
-New enrich embody gaskets
-New IAA gaskets
-New valve counterbalance gaskets
-New render filter
Mods:
-Dual intakes with Stelin polyglot makes it so you can use two Mass air line sensors so the car reads the air aright
-Front Mounted intercooler with 2.5" piping
-Hard pipes coming soured each throttle body
-APEXI bov's
-APEXI Manual Booster Controller
-BLITZ Turbo timer
-Carbon Canister Removed
-EGR Removed
-PRVR Removed
-Throttle embody coolant bypass
-Veilside Cat backwards exhaust
-Momo steering wheel
-Nismo Short shifter
-Custom Sparco racing way wrapped in suede
-Lowered with TEIN springs
-Slotted rotors
-Steel braided brushwood and render lines
-Custom Veilside Speedo gauges

Would this car be worth 9,000? I am seriously intellection of purchase this 300zx and everything that would need to be done....Well...Is done. Let me know down bellow if you guys conceive this would be a beatific deal, its a private listing I found around my community so yeah. Thanks guys!

Question #9:

how much should i sell my car for?

Okay I have a white 2001 pontiac noble am V6 coupe with 180,000 miles on it. About 2,000 miles past I had all the mass place in by a professed mechanic. I had a new top engine rebuild, new spark plus, vacuum hoses, pullys, curved belt, water pump, thermostat, brakes, all newborn radiator hoses, I also got brand new tires a month past that hit a life time warranty, and my automobile has professional tinted windows. Interior is near amend no tears or cracks. I also get lawful oil changes. With that existence said what would you toll my automobile at?

Question #10:

How much do brake pads cost?

I hit a 1999 automobile cherokee and has a transmission tubing imbibe off. Fluid leaked on and contaminated my brushwood pad. How such do brushwood pads cost from places like carquest or crucifer if you meet acquire the pads I module modify them myself so not including labor.



** Powered by Yahoo Answers